DB37 IDC Connectors
- Insulation Displacement (IDC) DB37 connectors
- Designed for 0.05" pitch ribbon cable
Scroll to Buy
See Also: DB37 Breakout Board, More Breakout Boards, Ribbon Cable
These connectors mate with any other standard DB-37 connectors. The DB37 connector is commonly found on computers, electronic devices, DAQ equipment, and industrial controls.
The insulation displacement (IDC) contacts on these connectors allow them to be quickly and easily crimped onto 37-wire flat ribbon cable.
A strain relief clip is included with each connector.
Connector Hardware OptionsThese connectors are currently available only with Threaded Inserts (Hardware option -I-).
The Threaded Inserts are useful when panel-mounting these connectors or when simply installing jack screws without panel mounting.
Captive screws compatible with these IDC DSUB connectors may be purchased from Winford Engineering. These are very useful for fastening the DSUB connectors to mating equipment. They may be used with DSUB connectors which have either the Unthreaded Holes or the Threaded Inserts hardware options; however, they work particularly well with the Threaded Inserts, which conveniently retain the screw until the time of installation.
NOTE: The captive screws should be installed in the connector BEFORE the strain relief is installed. After the strain relief is installed, installation of the screw becomes much more difficult.
Click here for the captive screw ordering page.
Pricing and Ordering
|DB37 Female IDC Crimp Connector, Threaded Insert, Black||$4.15||$4.00||$3.85||Yes|
|DB37 Male IDC Crimp Connector, Threaded Insert, Black||$4.15||$4.00||$3.85||Yes|
All of the above items are normally stocked. Please call us if you need to verify availability for a specific quantity, or for pricing at higher quantities. Please visit our ordering page for our ordering policies and a list of ordering methods.