Use these sturdy DIN rail mounting plates to mount your device to a standard 35mm DIN rail. This product features a flat plate mounting surface to which you can mount your device, and a metal DIN rail bracket secures the plate to the DIN rail. The pre-drilled holes in the plate make it simple and easy to attach your device to the plate using the included screws and nylon standoffs.
Pre-drilled holes are located to accommodate BeagleBone devices.
The 'right angle' design of this product allows you to mount devices perpedicular to the DIN rail, increasing device density. You can mount BeagleBone devices at a fraction of the horizontal space they would normally consume.
The mounting plate is made of sturdy 0.125" thick FR4 material (glass-reinforced epoxy laminate material) and comes with pre-drilled mounting holes for mounting your device. It comes with a sturdy steel DIN rail bracket (part# DINM30) installed on the plate. The steel brackets may be purchased alone if you desire the bracket without the adapter plate.
The photo below shows a BeagleBone module mounted to this product, which is mounted on a DIN rail.
To mount a device, first attach the nylon standoffs to the plate in the appropriate locations using the included flat-head screws. Then, attach the device to the nylon standoffs using the included pan-head screws.
These DIN rail adapter plates are easily attached and detached from the DIN rail. When on the rail, the bracket latches to the rail on both the top and bottom lips of the rail. The bracket should be oriented such that the "fixed" (non spring-loaded) end of the bracket mounts to the top of the DIN rail, thus allowing the fixed end to bear the load. The spring-loaded sliding hooks will then grip the bottom of the DIN rail. This arrangement provides the greatest rigidity and load capacity.
There are two methods for removing the adapter plate from the DIN rail:
Pricing and Ordering
|Product #||Description||1+||10+||25+||50+||RoHS||Buy Now|
|DINP03-BB01||DIN Rail Mounting Plate, Right Angle, for Beagle Bone Module; with Steel Bracket; for 35mm DIN Rail||$12.00||$11.00||$10.80||$10.00||Yes|
All of the above items are normally stocked. Please call us if you need to verify availability for a specific quantity, or for pricing at higher quantities. Please visit our ordering page for our ordering policies and a list of ordering methods.