Save DIN rail space by mounting your devices perpendicular to the DIN rail in your cabinet. This utilizes cabinet depth to fit more devices in the available space. You can mount hubs, routers, and many other devices at a fraction of the horizontal space they would normally consume. This product comes with standard 35mm DIN rail installed on the adapter plate; simply snap your devices on and install the assembly onto your existing DIN rail.
The mounting plate is made of sturdy 0.125" thick FR4 material (glass-reinforced epoxy laminate material) and comes with DIN rail installed on the plate. This product is available with DIN rail installed on just the front of the plate ('-1' option) or on both front and back ('-2' option). It comes with a sturdy steel DIN rail bracket (part# DINM30) installed on the plate. The DIN brackets may be purchased alone if you desire the bracket without the adapter plate.
These adapter plates are alternately known as DIN rail mounting plates, DIN adapter plates, DIN rail brackets, etc. We sell many varieties of universal DIN rail mounting plates and DIN rail brackets for numerous applications.
The photos below show how a DIN rail mounting plate with a right angle bracket might be mounted to a device.
This product is available with two different options.
Simply snap your devices onto the DIN rail which is mounted on the adapter plate. Install the entire assembly on your existing DIN rail.
These DIN rail adapter plate assemblies are easily attached and detached from the DIN rail. When on the rail, the bracket latches to the rail on both the top and bottom lips of the rail. The bracket should be oriented such that the "fixed" (non spring-loaded) end of the bracket mounts to the top of the DIN rail, thus allowing the fixed end to bear the load. The spring-loaded sliding hooks will then grip the bottom of the DIN rail. This arrangement provides the greatest rigidity and load capacity.
There are two methods for removing the adapter plate from the DIN rail:
|Part #||Description||PDF Drawing||DWG Drawing||IGES Model||STEP Model|
|DINP03-6035D-1||Right Angle DIN Rail Plate, 1 Rail|
|DINP03-6035D-2||Right Angle DIN Rail Plate, 2 Rails|
Pricing and Ordering
|Product #||Description||1+||10+||25+||50+||RoHS||Buy Now|
|DINP03-6035D-1||DIN Rail Right Angle Adapter, 6.0" x 3.5" Plate, with 5.9" 35mm Rail Section Installed on Right Side||$16.60||$15.25||$15.05||$14.65||Yes|
|DINP03-6035D-2||DIN Rail Right Angle Adapter, 6.0" x 3.5" Plate, with 5.9" 35mm Rail Sections Installed on Both Sides||$19.25||$17.90||$17.70||$17.35||Yes|
All of the above items are normally stocked. Please call us if you need to verify availability for a specific quantity, or for pricing at higher quantities. Please visit our ordering page for our ordering policies and a list of ordering methods.