Insert this diagnostic Breakout Test Board into existing cable connections and get access to signals via test points and headers; this is the pass-through function of this board.
In addition, switches allow individual signals to be disconnected from the circuit, which aids in diagnostics, troubleshooting, fault tolerance testing, or re-routing specific signals within a cable.
This compact design is meant to be inserted into the cabling of a system during operation. Normal system operation can continue while signals are probed and manipulated.
It is a handy test point breakout board with inline interruptor switches.
This board contains dual male 2x7 0.1" pitch (2.54mm) IDC14 headers.
This connector selection generally allows for very convenient insertion into existing cable configurations, without the use of gender changers, etc.
Schematic of Breakout Test Board Click image to enlarge.
A breakout test board may also be referred to as a "measurement breakout", "pass-through board", "test breakout", "inline test adapter", or "breakout testing board".
Product Documents
Part #
Description
PDF Drawing
DWG Drawing
IGES Model
STEP Model
App Note
BTS1H2X7-DIN
2x7 Header Diagnostic Board, DIN Mount
BTS1H2X7-FT
2x7 Header Diagnostic Board, Rubber Feet
BTS Series
Breakout Test Board Application Note
BTS1H2X7-DIN
2x7 Header Diagnostic Board, DIN Mount
BTS1H2X7-FT
2x7 Header Diagnostic Board, Rubber Feet
BTS Series
Breakout Test Board Application Note
Mounting Options
These products are available in two different mounting variants. Product numbers ending with -DIN come
with DIN clips already installed and ready to snap onto 35mm or 32mm DIN rail. Product numbers ending with -FT
have stick-on rubber feet installed on the bottom side, allowing for benchtop use or panel mounting. For panel mounting, we suggest
1/4" nylon standoffs under the mounting holes, and #6 screws.
DIN Rail Mount BTS1H2x7-DIN Click image to enlarge. Rail not included
Rubber Feet BTS1H2X7-FT Click image to enlarge.
Product Details
Pass-through test board with inline switches
Contains (2) 0.1" pitch 14-pin (2x7) male headers
Ejector latches on headers provide secure connection and quick disconnection
Includes Probe test points and Header test points for every signal
2x7 0.1" Pitch Breakout Test Board with Switches, Feet
Quantity
Price
1+
$30.50
10+
$27.80
All of the above items are normally stocked. Please call us if you need to verify availability for a specific quantity, or for pricing at higher quantities. Please visit our ordering page for our ordering policies and a list of ordering methods.