M12-17 Panel Mount Breakout Boards

BRKQAM12A-17F-A (Side View)

BRKQAM12A-17F-A (Side View)
(click image to enlarge)
BRKQAM12A-17F-A (Side View)
BRKQAM12A-17F-A (Connector View)
BRKQAM12A-17F-A (Terminal View)
BRKQAM12A-17F-A
BRKQAM12A-17M-A (Side View)
BRKQAM12A-17M-A (Connector View)
BRKQAM12A-17M-A (Terminal View)
BRKQAM12A-17M-A
  • Available with male or female 17-pin, A-coded M12 connector
  • Cost effective and reliable cable termination
  • Available with screw terminals
  • Terminal for each of the 17 lines, plus shield
  • Convenient strain relief feature for wires
See Also: More M12 Products,   More Panel Mount Breakout Boards,   More Breakout Boards


General Description

These M12 breakout boards are part of the BRKQ series, which provides a clean and simple solution for terminating wires at a connector through a panel or enclosure wall. These boards are great for making machine network connections, connecting external sensors, connecting human interface devices, and neatly transitioning cabling through an enclosure.

This board has a 17-pin, A-coded M12 connector that brings all 17 lines out to screw terminals. It is available with either a male or female connector. A breakout board is sometimes referred to as a "transition module", "terminal board", "terminal block", "breakout box", "breakout adapter", "terminator", or "interface module".

Features

M16 Panel Nut

M16 Panel Nut

This board comes with an M16 panel nut installed on its connector. This nut is used to secure the board to a panel or enclosure wall. Simply unscrew the nut from the connector, insert the connector through the wall, and reattach the nut to the connector.

Strain Relief Feature (BRKQAM12A-8F-A shown)

Strain Relief Feature (BRKQAM12A-8F-A shown)

This board also has a strain relief feature that eases the tension placed on wires connected to the terminal. To utilize this feature, simply wrap a cable tie (sold separately) around the strain relief extension and close it over the wires that populate the board's terminals.

Installation

To install a BRKQ board onto a panel or piece of equipment, follow these three simple steps:

BRKQ Installation Instructions

Product Details

  • Available with screw terminals
  • Terminal for each of the 17 lines, plus shield
  • Terminals accomodate wire sizes from 16AWG to 24AWG
  • Convenient strain relief feature for wires
  • Connection points are labeled with pin numbers
  • No soldering or crimping required

Accessories

Cable Ties (Sold Separately)

Cable Ties
These thin cable ties work very well as strain relief on a variety of Winford breakout boards, including boards in the BRKQ series. They are a great choice for tying both small and large wire bundles to the breakout boards.

Pricing and Ordering

Product # Description PriceRoHS Buy Now
17-Pin Female Connector with Screw Terminals:
BRKQAM12A-17F-A M12 Breakout Board, Panel Mount, 17-Pin Female Connector, A-Coded, Screw Terminals, with M16 Panel Nut $100.00  Yes
17-Pin Male Connector with Screw Terminals:
BRKQAM12A-17M-A M12 Breakout Board, Panel Mount, 17-Pin Male Connector, A-Coded, Screw Terminals, with M16 Panel Nut $100.00  Yes

17-Pin Female Connector with Screw Terminals:
BRKQAM12A-17F-A
RoHS   Yes
M12 Breakout Board, Panel Mount, 17-Pin Female Connector, A-Coded, Screw Terminals, with M16 Panel Nut
QuantityPrice
1+$100.00
17-Pin Male Connector with Screw Terminals:
BRKQAM12A-17M-A
RoHS   Yes
M12 Breakout Board, Panel Mount, 17-Pin Male Connector, A-Coded, Screw Terminals, with M16 Panel Nut
QuantityPrice
1+$100.00

All of the above items are normally stocked. Please call us if you need to verify availability for a specific quantity, or for pricing at higher quantities. Please visit our ordering page for our ordering policies and a list of ordering methods.

Screwdrivers Need a quality screwdriver for your breakout boards? Winford sells Wiha screwdrivers!


© 2019 Winford Engineering, LLC;  4561 Garfield Road; Auburn,  Michigan  48611;  USA