DIN Rail Mounting Plate for Arduino Devices; with Parallel Bracket

DINP02-RD01

DINP02-RD01
(click image to enlarge)
DINP02-RD01
DINP02-RD01 (Bottom Side)
DINP02-RD01 with Arduino MEGA
  • Mount your Arduino devices to DIN rail
  • Supports Arduino UNO, Leonardo, YUN, MEGA2560, and Due devices
  • Sturdy construction
  • Plate size: approx 2.2" x 4.20"
  • Screws and nylon standoffs included
See Also: More Arduino DIN Plates,   DIN Mounting Clips,   DIN Rail


General Description

Use these sturdy DIN rail mounting plates to mount your device to a standard 35mm DIN rail. This product features a flat plate mounting surface to which you can mount your device, and a metal DIN rail bracket secures the plate to the DIN rail. The pre-drilled holes in the plate make it simple and easy to attach your device to the plate using the included screws and nylon standoffs.

Nylon standoffs are pre-installed to accommodate Arduino UNO / Leonardo / Yun and Arduino MEGA2560 / Due devices. Screws are provided to attach your Arduino device to the nylon standoffs.

The mounting plate is made of sturdy 0.125" thick FR4 material (glass-reinforced epoxy laminate material). It comes with a sturdy steel DIN rail bracket (part# DINM23) installed on the plate. The steel brackets may be purchased alone if you desire the bracket without the adapter plate.

DINP03-RD01

Note: For a space-saving plate which mounts the Arduino perpendicular to the DIN rail, see our DINP03-RD01.

These adapter plates are alternately known as DIN rail mounting plates, DIN adapter plates, DIN rail brackets, etc. We sell many varieties of universal DIN rail mounting plates and DIN rail brackets for numerous applications.

Installation and Removal

Mounting your Arduino Device to the Plate

To mount your Arduino device, attach it to the pre-installed nylon standoffs using the included pan-head screws.

Installing and Removing the Plate Assembly on DIN Rail

These DIN rail plate assemblies are easily attached and detached from the DIN rail. When on the rail, the bracket latches to the rail on both the top and bottom lips of the rail. The bracket should be oriented such that the "fixed" (non spring-loaded) end of the bracket mounts to the top of the DIN rail, thus allowing the fixed end to bear the load. The spring-loaded sliding hooks will then grip the bottom of the DIN rail. This arrangement provides the greatest rigidity and load capacity.

There are two methods for removing the plate from the DIN rail:

  • Push & Pivot: In most cases, the simplest method is to push up on the assembly, pivot the top out away from the rail, and lower the entire assembly off the rail. This technique does not require access to the release handle on the bracket which makes this method easier.
  • Release Handle: If, for some reason, the Push & Pivot method does not work for your application, you can also remove the plates from a DIN rail using the release handle on the bracket. Either pull the handle from the bottom edge of the bracket (see our lanyards, sold separately), or push the handle down from the top edge of the bracket. This releases the sliding hooks that grip the bottom of the rail and allows the bottom edge of the bracket to swing out away from the DIN rail. The entire plate and your mounted device can then be lifted off the DIN rail.

Product Documents

Part #DescriptionPDF DrawingDWG DrawingIGES ModelSTEP Model
DINP02-RD01DIN Plate, for Arduino DevicesPDF DWG IGES CAD
DINP02-RD01

DIN Plate, for Arduino Devices

PDF DWG IGES CAD

Product Details

  • Supports Arduino UNO, Leonardo, YUN, MEGA2560, and Due devices
  • Plate size: approx 2.2" x 4.20"
  • Screws and nylon standoffs included
  • Constructed of 0.125" thick FR4 material
  • Comes mounted on steel DIN bracket
  • Clips onto 35mm DIN rail
  • Color: Black
  • DIN Rail and Arduino module not included

Pricing and Ordering

Product # Description 1+ 10+ 25+ 50+ RoHS Buy Now
DINP02-RD01 DIN Rail Mounting Plate, Parallel to the Rail, for Arduino Modules; with Steel Bracket; for 35mm DIN Rail $13.95 $13.05 $12.55 $12.20  Yes

DINP02-RD01
RoHS   Yes
DIN Rail Mounting Plate, Parallel to the Rail, for Arduino Modules; with Steel Bracket; for 35mm DIN Rail
QuantityPrice
1+$13.95
10+$13.05
25+$12.55
50+$12.20

All of the above items are normally stocked. Please call us if you need to verify availability for a specific quantity, or for pricing at higher quantities. Please visit our ordering page for our ordering policies and a list of ordering methods.


© 2025 Winford Engineering, LLC;  4561 Garfield Road; Auburn,  Michigan  48611;  USA