Use these sturdy general purpose universal DIN rail mounting plates to mount nearly any device to standard 35mm DIN rail. This product features a flat plate mounting surface to which you can mount your device, and a metal DIN rail bracket secures the plate to the DIN rail.
The mounting plate is made of sturdy 0.125" thick FR4 material (glass-reinforced epoxy laminate material) and is a solid plate. It comes with a sturdy steel DIN rail bracket (part# DINM23) installed on the plate. The steel brackets may be purchased alone if you desire the bracket without the adapter plate.
The photos below show how a DIN rail mounting plate might be mounted to a device.
To mount a device onto the plate, simply drill holes in the plate to match the mounting holes on your device. Note that the outline of the metal DIN rail bracket is shown on the front of the adapter plate; this aids in avoiding the steel DIN clip when drilling mounting holes for your device.
These DIN rail adapter plate assemblies are easily attached and detached from the DIN rail. When on the rail, the bracket latches to the rail on both the top and bottom lips of the rail. The bracket should be oriented such that the "fixed" (non spring-loaded) end of the bracket mounts to the top of the DIN rail, thus allowing the fixed end to bear the load. The spring-loaded sliding hooks will then grip the bottom of the DIN rail. This arrangement provides the greatest rigidity and load capacity.
There are two methods for removing the adapter plate from the DIN rail:
Pricing and Ordering
|Product #||Description||1+||10+||25+||50+||RoHS||Buy Now|
|DINP02-2240A||DIN Rail Universal Mounting Plate, 2.25" x 4.0"; with Steel Bracket; for 35mm DIN Rail||$8.75||$7.70||$7.50||$7.25||Yes|
All of the above items are normally stocked. Please call us if you need to verify availability for a specific quantity, or for pricing at higher quantities. Please visit our ordering page for our ordering policies and a list of ordering methods.