Cat6 RJ45 Network Keystone 110 Punchdown Jacks
- Cat6 RJ45 Jack
- Fits Keystone wall plates
- Requires a 110 punchdown tool
Scroll to Buy
See Also: Cat 5e Toolless Jacks, Cat5e Network Cables, Wall Plates, Panel-Mount RJ45 Couplers, All Keystone Jacks
These RJ45 Keystone Jacks provide an excellent method of bringing network connections into any room. They fit into any standard keystone jack wall plate. Installation requires the use of a 110 punchdown tool. Wire color codes are included on the jack to assist in following the standard wiring scheme (T568B is common in the USA).
These jacks are white in color.
Technical InformationRJ45 Pinout, looking at face of jack:
The jacks are labeled for both T568A and T568B wiring schemes. In the USA, T568B is very common. If you use T568B, the wire colors are connected to the pins as shown below:
|RJ45 Pin||Wire Color||Stripe||Signal|
The wires with corresponding colors (e.g. white with orange stripe and
orange with white stripe) are twisted in the network cabling and should
remain twisted as much as possible when terminating the cable at a jack.
To facilitate this, the jack brings the connections out with the paired
wires adjacent to each other.
Pricing and Ordering
|Cat6 RJ45 Network Keystone Jack, 110 Punchdown, White||$3.10||$2.60||Yes|
All of the above items are normally stocked. Please call us if you need to verify availability for a specific quantity, or for pricing at higher quantities. Please visit our ordering page for our ordering policies and a list of ordering methods.