These sturdy, black plastic enclosures are designed to enclose your custom-designed circuit boards which contain DB9 or DB15HD connectors. These Enclosures give your product improved aesthetics, insulation, and additional protection for wires and circuitry. See the PDFs below for our recommended PCB dimensions.
Installation is simple; simply insert your board in the lower half of the enclosure and secure using the included snap-rivets or screws. Tie-wrap the wires down as a strain-relief, install the top half of the enclosure, and secure with the included screws.
These enclosures come in two different lengths that can be chosen based on the amount of room needed for your cicuitry. Both lengths can be used with either DB9 or DB15HD connectors. The larger ECB9B1-x is 2.59" long, comes with a separate plastic T-clip to be used for strain-relief, and uses screws for mounting your PCB. The smaller ECB9A2-x is 2.05" long, uses an updated design to integrate the strain relief into your PCB shape, and uses snap rivets to mount your PCB for faster installation. Please see our drawings for details.
These Enclosures come either with Thumbscrews (-T), or without any connector hardware (-N). The -N options are typically used in cases where your Circuit Board has a connector with Jack-Screws already installed. See the drawings below for a list of included hardware.
|Part #||Revision||Description||PDF Drawing||DWG Drawing||IGES Model||STEP Model|
|ECB9A2-N||A||DB9/DB15HD PCB Enclosure Kit (No Thumbscrews)|
|ECB9A2-T||A||DB9/DB15HD PCB Enclosure Kit with Thumbscrews|
|ECB9A2-x||PCB Dimension Recommendation|
|ECB9B1-N||A||DB9/DB15HD PCB Enclosure Kit (No Thumbscrews)|
|ECB9B1-T||A||DB9/DB15HD PCB Enclosure Kit with Thumbscrews|
|ECB9B1-x||PCB Dimension Recommendation|
Pricing and Ordering
|Product #||Description||1+||10+||50+||RoHS||Buy Now|
|ECB9A2-N||DB9/DB15HD PCB Enclosure Kit; 2.05" Length; No Thumbscrews||$5.30||$5.05||$4.55||Yes|
|ECB9A2-T||DB9/DB15HD PCB Enclosure Kit; 2.05" Length; Thumbscrews||$5.80||$5.55||$5.05||Yes|
|ECB9B1-N||DB9/DB15HD PCB Enclosure Kit; 2.59" Length; No Thumbscrews||$7.00||$6.75||$6.35||Yes|
|ECB9B1-T||DB9/DB15HD PCB Enclosure Kit; 2.59" Length; Thumbscrews||$7.50||$7.25||$6.85||Yes|
All of the above items are normally stocked. Please call us if you need to verify availability for a specific quantity, or for pricing at higher quantities. Please visit our ordering page for our ordering policies and a list of ordering methods.