DIN Rail Mounting Plate for VESA Displays & Devices
- Mount your VESA device on a DIN rail
- Sturdy construction
- Plate size: 4.53" x 6.50"
- Mounting hole pattern: 100x100mm & 75x75mm
- Constructed of 0.125" thick Aluminum material
- Clips onto 35mm DIN rail
General Description
Use these sturdy DIN rail mounting plates to mount devices with VESA mounting holes to standard 35mm DIN rail. Although the VESA hole pattern was originally designed for flat panel displays such as monitors and TVs, it has also been used for small PCs, all-in-one PCs, keyboard trays, etc. This product features a right-angle metal DIN rail bracket, providing a stable attachment to the DIN rail.
The 'right angle' design of this product allows you to mount devices perpedicular to the DIN rail, increasing device density. You can mount mini PCs, NUCs, and many other devices at a fraction of the horizontal space they would normally consume. The right angle design is not likely to be a good fit for mounting displays in most cases. See our standard VESA mounting plate if you need to mount a display.
The mounting plate is made of sturdy 0.125" thick Aluminum plate material and comes with pre-drilled mounting holes to accomodate VESA devices with 100x100mm & 75x75mm mounting hole spacing. The plate comes with a sturdy steel DIN rail bracket (part# DINM30LR) installed. The DIN brackets may be purchased alone if you desire the bracket without the adapter plate.
These adapter plates are alternately known as DIN rail mounting plates, DIN adapter plates, DIN rail brackets, etc. We sell many varieties of universal DIN rail mounting plates and DIN rail brackets for numerous applications.
Installation and Removal
Mounting Your Devices
To mount a device onto the plate, use the pre-drilled holes in each corner of the plate. Or, for non-standard applications, add your own holes to suit your needs.
Installing and Removing the Plate Assembly
These DIN rail plate assemblies are easily attached and detached from the DIN rail. When on the rail, the bracket latches to the rail on both the top and bottom lips of the rail. The bracket should be oriented such that the "fixed" (non spring-loaded) end of the bracket mounts to the top of the DIN rail, thus allowing the fixed end to bear the load. The spring-loaded sliding hooks will then grip the bottom of the DIN rail. This arrangement provides the greatest rigidity and load capacity.
Release Handle: You can remove the plates from a DIN rail using the release handle on the bracket. Either pull the handle from the bottom edge of the bracket (see our lanyards, sold separately), or push the handle down from the top edge of the bracket. This releases the sliding hooks that grip the bottom of the rail and allows the bottom edge of the bracket to swing out away from the DIN rail. The entire plate and your mounted device can then be lifted off the DIN rail.Product Documents
| Part # | Description | PDF Drawing | DWG Drawing | IGES Model | STEP Model |
|---|---|---|---|---|---|
| DINPA03LR-ZVE100B | DIN Plate, 4.53" x 6.50", Aluminum, VESA Mounting Hole Patterns | 
| 
| 
| 
|
DIN Plate, 4.53" x 6.50", Aluminum, VESA Mounting Hole Patterns
Product Details
- Plate size: 4.53" x 6.50"
- Mounting hole pattern: 100x100mm & 75x75mm
- Constructed of 0.125" thick Aluminum material
- Clips onto 35mm DIN rail
- DIN Rail not included
Pricing and Ordering
| Product # | Description | 1+ | 10+ | RoHS | Buy Now |
|---|---|---|---|---|---|
| DINPA03LR-ZVE100B | DIN Rail Right Angle Mounting Plate for VESA Devices with 75x75mm or 100x100mm Hole Patterns; Unthreaded Holes | $23.00 | $21.00 | Yes |
| Quantity | Price |
|---|---|
| 1+ | $23.00 |
| 10+ | $21.00 |
All of the above items are normally stocked. Please call us if you need to verify availability for a specific quantity, or for pricing at higher quantities. Please visit our ordering page for our ordering policies and a list of ordering methods.