4.0" x 6.0" DIN Rail Mounting Plate with Mounting Slots and Right Angle Bracket

DINP03-4060C (Side View)

DINP03-4060C (Side View)
(click image to enlarge)
DINP03-4060C (Side View)
DINP03-4060C (Application View - Device Side)
DINP03-4060C
DINP03-4060C (Rail Side)
DINP03-4060C (Application View - Back Side)
DINP03-4060C (Front View)
DINP03-4060C (Application View - Front Side)
  • Mount your devices to DIN rail
  • Versatile, universal design
  • Sturdy construction
  • Saves valuable space on DIN rail
  • 4.0" x 6.0" plate size
  • 25mm wide right angle steel DIN bracket
  • Mounting slots for velcro straps or hardware
See Also: Velcro Straps,   More DIN Plates,   DIN Clips,   DIN Rail


General Description

Use these sturdy universal DIN rail mounting plates to mount nearly any device to standard DIN rail. This product features a flat plate mounting surface to which you can mount your device, and a metal DIN rail bracket secures the plate to the DIN rail.

The 'right angle' design of this product allows you to mount devices perpedicular to the DIN rail, increasing device density. You can mount hubs, routers, and many other devices at a fraction of the horizontal space they would normally consume.

The mounting plate is made of sturdy 0.125" thick FR4 material (glass-reinforced epoxy laminate material) and comes with slots for securing your device with velcro straps (sold separately) or hardware. It comes with a sturdy steel DIN rail bracket (part# DINM30) installed on the plate. The steel brackets may be purchased alone if you desire the bracket without the adapter plate.

These adapter plates are alternately known as DIN rail mounting plates, DIN adapter plates, DIN rail brackets, etc. We also sell several other styles of DIN rail mounting plates and DIN rail brackets.

Application Examples

The photos below show how a device might be mounted to this right angle plate with slots.

Front View of Device Mounted on DIN Plate and on DIN Rail
Front View of Application
EnlargeClick image to enlarge.
Back View of Device Mounted on DIN Plate and on DIN Rail
Back View of Application
EnlargeClick image to enlarge.
Side View of Device Mounted on DIN Plate and on DIN Rail
Side View of Application
EnlargeClick image to enlarge.

Installation and Removal

Mounting a Device to the Plate

To mount a device onto the plate, wrap the velcro straps (sold seperately) through the slots on the plate and around your device. Alternatively, insert screws through the slots to secure the device.

Installing and Removing the Plate on DIN Rail

These DIN rail adapter plates are easily attached and detached from the DIN rail. When on the rail, the bracket latches to the rail on both the top and bottom lips of the rail. The bracket should be oriented such that the "fixed" (non spring-loaded) end of the bracket mounts to the top of the DIN rail, thus allowing the fixed end to bear the load. The spring-loaded sliding hooks will then grip the bottom of the DIN rail. This arrangement provides the greatest rigidity and load capacity.

There are two methods for removing the adapter plate from the DIN rail:

  • Release Handle: To remove the plates from a DIN rail using the release handle on the bracket, either pull the handle from the bottom edge of the bracket, or push the handle down from the top edge of the bracket. This releases the sliding hooks that grip the bottom of the rail and allows the bottom edge of the bracket to swing out away from the DIN rail. The entire plate and your mounted device can then be lifted off the DIN rail.
  • Push & Pivot: A simpler method, however, is to push up on the mounted device, pivot the top of the device out away from the rail, and lower the entire device off the rail. This technique does not require access to the release handle on the bracket which makes this method easier.

Product Details

  • 4.0" x 6.0" plate size
  • Constructed of 0.125" thick FR4 material
  • 25mm wide right angle steel DIN bracket
  • Mounting slots for velcro straps or hardware
  • Clips onto 35mm DIN rail
  • Color: Black
  • Velcro straps not included
  • DIN Rail not included

Pricing and Ordering

Product # Description 1+ 10+ 50+ RoHS Buy Now
DINP03-4060C DIN Rail Universal Mounting Plate, Right Angle, 4.0" x 6.0"; with Steel Bracket; Mounting Slots; for 35mm DIN Rail $13.50 $12.25 $11.70  Yes

DINP03-4060C
RoHS   Yes
DIN Rail Universal Mounting Plate, Right Angle, 4.0" x 6.0"; with Steel Bracket; Mounting Slots; for 35mm DIN Rail
QuantityPrice
1+$13.50
10+$12.25
50+$11.70

All of the above items are normally stocked. Please call us if you need to verify availability for a specific quantity, or for pricing at higher quantities. Please visit our ordering page for our ordering policies and a list of ordering methods.


Velcro Straps

velcro
Winford offers rolls of 'velcro' hook & loop straps which work well with these slotted DIN plates.
Product # Description 1+ 10+ RoHS Buy Now
HLDBK050-15 Hook and Loop, Double-sided, Black, 1/2" Width, 15ft Roll $6.50 $5.00  Yes
HLDBK050-75 Hook and Loop, Double-sided, Black, 1/2" Width, 75ft Roll $24.00 $24.00  Yes

HLDBK050-15
RoHS   Yes
Hook and Loop, Double-sided, Black, 1/2" Width, 15ft Roll
QuantityPrice
1+$6.50
10+$5.00
HLDBK050-75
RoHS   Yes
Hook and Loop, Double-sided, Black, 1/2" Width, 75ft Roll
QuantityPrice
1+$24.00
10+$24.00

All of the above items are normally stocked. Please call us if you need to verify availability for a specific quantity, or for pricing at higher quantities. Please visit our ordering page for our ordering policies and a list of ordering methods.


© 2019 Winford Engineering, LLC;  4561 Garfield Road; Auburn,  Michigan  48611;  USA