These sturdy DIN rail mounting brackets come in handy for a wide variety of projects where DIN rail is used for mounting devices. They feature a flat mounting surface and four mounting hole locations, two of which come with pre-installed nuts. This clip is compatible with 35mm DIN rail and is designed to latch onto the DIN rail by using a fixed tab in the upper end of the clip and a spring-loaded sliding tab on the lower end. Simply pulling on the orange handle releases the sliding tab, allowing installation or removal of the clip.
This clip contains four mounting hole locations, two of which come with M4 nuts pre-installed. These two threaded mounting holes provide a convenient mounting point when using M4 screws.
The DINM03 clip is manufactured by Phoenix Contact. For reference, additional technical data is available on the Phoenix Contact product page.
We also offer other DIN clips that are similar in concept but utilize a slightly different design. Please see part numbers DINM12-RC, DINM13-RC, and DINM15V2-RC.
Pricing and Ordering
|Product #||Description||1+||10+||50+||100+||RoHS||Buy Now|
|DINM03||DIN Rail Mounting Clip, 68mm x 45mm||$13.00||$12.50||$12.10||$11.60||Yes|
|Product #||Description||1+||5+||10+||RoHS||Buy Now|
|SCMAPP-M4-A-8-100||Screw, Machine, Pan Head, Phillips, M4 Thread, 8mm Length, Bag of 100||$4.75||$4.35||$3.85||Yes|
|SCMAPP-M4-A-10-100||Screw, Machine, Pan Head, Phillips, M4 Thread, 10mm Length, Bag of 100||$4.80||$4.40||$3.90||Yes|
|SCMAPP-M4-A-12-100||Screw, Machine, Pan Head, Phillips, M4 Thread, 12mm Length, Bag of 100||$4.85||$4.45||$3.95||Yes|
All of the above items are normally stocked. Please call us if you need to verify availability for a specific quantity, or for pricing at higher quantities. Please visit our ordering page for our ordering policies and a list of ordering methods.