DB-50 Slim Breakout Boards

BRKSD50F-C

BRKSD50F-C
(click image to enlarge)
BRKSD50F-C
BRKSD50F-C (Connector View)
BRKSD50F-C (Overhead View)
BRKSD50F-R (Connector View)
BRKSD50M-C
BRKSD50M-C (Connector View)
BRKSD50M-C (Overhead View)
BRKSD50M-R (Connector View)
  • Available with DB50 Male or Female connector
  • Screw terminal for each of the 50 lines, plus shield
  • Available with captive screws or jack screws
  • Can be panel mounted
  • Small footprint
See Also: More DB50 Breakout Boards,   DB50 Cables,   All Breakout Boards


General Description

Make connections quickly and reliably with this breakout board, which brings every pin of its DB50 connector out to screw terminals. This product is available with both male and female connectors.

Slim Footprint Allows Tight Spacing

This product's 'slim' form factor means that the end profile of the breakout board is no wider than the connector itself. This can be important for installations where equipment contains multiple connectors which are spaced closely together. Even in this restricted space, these slim breakout boards can still be mounted directly to the equipment without using extension cables. Although the breakout board footprint is small, provision for strain reliefs has been included; holes drilled in the board provide anchor points where tie-wraps can be attached.

Captive Screw / Jack Screw Comparison

These breakout boards are perfect for field wiring tasks and are available in two different connector hardware options: captive screws or jack screws. The jack screws work well when mounting the breakout board to a wall box plate or thin panel that has a DSUB cutout; the captive screws provide a convenient connection to a mating connector that already has jack screws. See the Connector Hardware Options section below for more details.

This breakout board is perfect for production applications as well as experimentation and prototype work. It is helpful for working with I/O cards, Data Aquisition (DAQ) devices, and other devices that use a DB-50 connector.

Technically, the correct term for a DB50 connector is DD50, but that term is not commonly used.

Need something different? We stock a variety of DB50 breakout board styles and form factors. Please have a look!

A breakout board is sometimes referred to as a "transition module", "terminal board", "terminal block", "breakout box", "breakout adapter", "terminator", or "interface module".

Breakout boards with enclosures Need an enclosed breakout board? Winford offers our BRKE line of boards, which come installed in enclosures.

Product Documents

Part #DescriptionPDF DrawingDWG DrawingIGES ModelSTEP Model
BRKSD50F-CFemale DB50 with Captive ScrewsPDF DWG IGES CAD
BRKSD50F-RFemale DB50 with Jack ScrewsPDF DWG IGES CAD
BRKSD50M-CMale DB50 with Captive ScrewsPDF DWG IGES CAD
BRKSD50M-RMale DB50 with Jack ScrewsPDF DWG IGES CAD
BRKSD50F-C

Female DB50 with Captive Screws

PDF DWG IGES CAD
BRKSD50F-R

Female DB50 with Jack Screws

PDF DWG IGES CAD
BRKSD50M-C

Male DB50 with Captive Screws

PDF DWG IGES CAD
BRKSD50M-R

Male DB50 with Jack Screws

PDF DWG IGES CAD

Connector Hardware Options

These breakout boards are available with either captive screws or jack screws for the connector hardware:

Captive Screw
Captive Screw
EnlargeClick image to enlarge.
Jack Screw
Jack Screw
EnlargeClick image to enlarge.

  • Captive Screws are male #4-40 screws coming out of the face of the connector to accommodate direct mounting to a mating connector which contains jack screws (see picture below).
  • Jack Screws are the hex standoffs typically installed on DSUB connectors; they are threaded for #4-40 screws. Jack screws are perfect for connecting to a cable which has thumbscrews, for mounting to a wall plate, or for installing on a thin panel which has a DSUB cutout (see picture below).
Direct Mount with Captive Screws
Application: Direct Mount Using Captive Screws
BRKSD25M-C pictured
EnlargeClick image to enlarge.
Panel Mount with Jack Screws
Application: Panel Mount Using Jack Screws
BRKSD25F-R pictured
EnlargeClick image to enlarge.

Product Details

  • DB50 connector
  • Screw terminal for each of the 50 lines, plus shield
  • Screw terminals accommodate wire sizes from 16AWG to 26AWG
  • Available with captive screws or jack screws
  • Can be panel mounted
  • Approximate dimensions: 2.75" x 2.65"
  • Small footprint

Screwdrivers Need a quality screwdriver for your breakout boards? Winford sells Wiha screwdrivers!

Pricing and Ordering

Product # Description 1+ 10+ RoHS Buy Now
DB50 Female Connector:
BRKSD50F-C DB50 Female Slim Breakout Board, R/A Connector, Captive Screws $79.00 $72.00  Yes
BRKSD50F-R DB50 Female Slim Breakout Board, R/A Connector, Jack Screws $77.00 $70.00  Yes
DB50 Male Connector:
BRKSD50M-C DB50 Male Slim Breakout Board, R/A Connector, Captive Screws $79.00 $72.00  Yes
BRKSD50M-R DB50 Male Slim Breakout Board, R/A Connector, Jack Screws $77.00 $70.00  Yes

DB50 Female Connector:
BRKSD50F-C
RoHS   Yes
DB50 Female Slim Breakout Board, R/A Connector, Captive Screws
QuantityPrice
1+$79.00
10+$72.00
BRKSD50F-R
RoHS   Yes
DB50 Female Slim Breakout Board, R/A Connector, Jack Screws
QuantityPrice
1+$77.00
10+$70.00
DB50 Male Connector:
BRKSD50M-C
RoHS   Yes
DB50 Male Slim Breakout Board, R/A Connector, Captive Screws
QuantityPrice
1+$79.00
10+$72.00
BRKSD50M-R
RoHS   Yes
DB50 Male Slim Breakout Board, R/A Connector, Jack Screws
QuantityPrice
1+$77.00
10+$70.00

All of the above items are normally stocked. Please call us if you need to verify availability for a specific quantity, or for pricing at higher quantities. Please visit our ordering page for our ordering policies and a list of ordering methods.

Accessories

Cable Ties

 Cable Ties
- strain relief for Breakout Boards

© 2022 Winford Engineering, LLC;  4561 Garfield Road; Auburn,  Michigan  48611;  USA