Make connections quickly and reliably with this breakout board, which brings every pin of its 8-pin M12 connector out to spring terminals. This product is currently available with A-coded female connectors.
Each pin, including shield, is also brought to solder pads (1 per pin) at 0.1" spacing, allowing easy addition of pin headers or other components. Please note that the breakout boards are manufactured with a connection between each connector pin and the corresponding terminal block position; no soldering of any type is necessary. The solder pads simply provide an area for making optional connections to additional headers or other components.
This breakout board features push-in spring connection terminal blocks. These screwless spring clamp terminal blocks allow connections to be made very quickly and efficiently. The spring terminal connections are reliable and secure, but wires can be connected and disconnected in a fraction of the time required with standard screw terminal blocks. Simply depress the actuator button on top of the terminal block, insert or remove the wire, and release the button. Done! In addition, screwless spring connections can offer better results in environments where vibration could potentially loosen standard screw terminal block connections. If your application requires screw terminals rather than spring terminals, please consider the BRKM12x-8x design or the other M12 options listed here.
For a smaller form factor M12 breakout board designed for panel mounting, please click here.
We stock a variety of M12 breakout board styles and form factors. Please have a look!
This breakout board is perfect for production applications as well as experimentation and prototype work.
A breakout board is sometimes referred to as a "transition module", "terminal board", "terminal block", "breakout box", "breakout adapter", "terminator", or "interface module". //php include 'brke_ad.inc'; ?>
These products are available in two different mounting variants. Product numbers ending with -DIN come with DIN clips already installed and ready to snap onto 35mm or 32mm DIN rail. Product numbers ending with -N have no mounting hardware included; they can be easily panel-mounted by using 1/4" nylon standoffs under the mounting holes, and #6 screws.
Pricing and Ordering
|Product #||Description||1+||10+||RoHS||Buy Now|
M12 8-Pin Female Connector With Spring Terminals:
|BRKGM12A-8FS-DIN||M12 Breakout Board, 8-Pin Female Connector with Shield, A-Coded, Straight Connector, Spring Terminals, DIN Rail Mount||$31.00||$28.90||Yes|
|BRKGM12A-8FS-N||M12 Breakout Board, 8-Pin Female Connector with Shield, A-Coded, Straight Connector, Spring Terminals||$29.50||$27.40||Yes|
All of the above items are normally stocked. Please call us if you need to verify availability for a specific quantity, or for pricing at higher quantities. Please visit our ordering page for our ordering policies and a list of ordering methods.
|Need a quality screwdriver for your breakout boards? Winford sells Wiha screwdrivers!|